After the failure of the 10T deep-throat press
, depending on the difficulty of the failure and whether the failure is a common failure, different analysis methods and problem solving methods should be reasonably adopted. Specifically, there should be the following five principles.
1.Check before power on
First of all, through observation, testing and analysis in a 125 ton deep-throat punch when the power is off. After confirming that it is a non-malignant cycle failure or non-destructive failure, you can power up the 125-ton deep-throat punch; under operation, perform dynamic observation, inspection and testing to find the failure. For malignant and destructive faults, the danger must be eliminated before power-on, and dynamic diagnosis should be avoided in the case of operation.
2. Program before operation (or static after moving)
The maintenance personnel should do the work first and then move blindly. They should not inquire blindly. They should first ask the 125t deep-throat punch operator about the failure process and status. After reading the machine tool manual and drawing data, you can find and deal with the fault manually. If you come across this and knock on it, you can still tolerate the result in vain. If the damage at the scene leads to misjudgment, or introduces a new fault or leads to more serious consequences, the consequences will be endless.
3. Software first, then hardware
Should first check whether the software of the CNC system works normally. Some failures may be caused by the loss of software parameters, or by the operator's improper use and operation methods. Don't disassemble and unload as soon as possible, so as to avoid more serious consequences.
4, first group after special
When troubleshooting a fault, first consider the common possible causes, and then analyze the rare causes that rarely occur. For example, when the main shaft of a 125-ton deep-throat press is inaccurate, it is often caused by the position of the downshift stop. In the event of this failure, the feed block location should be checked first. After eliminating the common possibility of this fault, check the pulse encoder, position control and other links.
5.Simple first and then complicated
When multiple faults are intertwined and cannot be started for a while, you should solve the easy problems first, and then the more difficult problems. Often in the process of solving simple faults, difficult problems may also become easy, or be inspired when troubleshooting simple faults, and a clearer understanding of complex faults will lead to solutions.
For more information, please Baidu: Feiya Shandong Punch , Feiya Punch Manufacturer , Feiya 10T Deep Throat Punch , Feiya 16T Deep Throat Punch , Feiya 25T Deep Throat Punch Related news: > How does the clearance affect the life of the punching dies in Shandong? > How to test the accuracy of 25T deep throat punch? > The price of different types of punches is different > How does 10T deep throat punch detect and troubleshoot? > Can Shandong press adjust speed? > How much do you know about the precision and testing methods of Shandong punch? > What should you pay attention to when choosing a punch filter > The rotation of the crankshaft is the power source of the punch
Shandong Zibo Feiya Punch Factory http://ruihegift.com welcomes you!
Related Product Information: